| Circulating fluid Note 2) | Circulating method | Temperature range setting Note 1) C | Cooling capacity Note 3) (50/60 Hz)kW | Heating capacity Note 4) kW | Temperature stability Note 5) C | Pump capacity Note 6)(50/60 Hz) MPa | Rated flow Note 7) (50/60 Hz) l /min | Tank capacity l | Port size | Wetted parts material | Temperature range C | Pressure range MPa | Required flow rate Note 8) (50/60 Hz) l/min | Power supply | Applicable ground fault circuit interrupter capacity Note 9) A | Maximum operating current A | Rated power consumption Note 11) (50/60 Hz) kW | Remote operation signal input | Operation signal output | Alarm stop signal output | Alarm |
| HRGC005 | Air-cooled refrigeration | R407C (HFC) | Refrigerator ON/OFF control or Proportional valve PID control | Temperature: 5 to 40C, Humidity: 30 to 70%RH | Clear water, Deionized water, Aqueous solution of 15% ethylene glycol | For externally sealed circuit | 5 to 35 | 4.5/4.8 (at 20C) | ? | ?1.0 (Refrigerator ON/OFF control), ?0.5 (Proportional valve PID control) | 0.21/0.32 (at 23 l/28 l/min) | 23/28 | Approx. 20 | Rc1/2 | Stainless steel, PPE, PVC, Copper brazing (Heat exchanger), Bronze, Brass | ? | ? | ? | ? | Stainless steel, PVC, Copper brazing (heat exchanger), Bronze, Brass | Single-phase 200 to 230 VAC 50/60 Hz Allowable voltage fluctuation ?10% | 30 | 17.2 | 2.07/2.23 | Relay contact input (operates when the switch is closed, stops when the switch is opened) | Relay contact output (switch closed when operating, switch open when stopped, switch open when shut down) | Relay contact output (switch closed when alarm is turned off, switch open when alarm is turned on, switch closed when shut down) | Refer to page 7. | 110 |
