| IC9 | ?0.1 MPa | 500 kPa | Air/Non-corrosive gas | 48 x 48 x 100.5 | 12 to 24 VDC (15 W or more), Ripple (p-p) 1% or less | qNo. of inputs: Up to 10 bit input from sequencer (parallel) Note 5) Input method: No-voltage contact or NPN open collector input Minimum pulse width: 50 msecwInput method: 4 point input with keys(Interval time can be set by programming.) | 12 VDC (Max. 300 mA) with accuracy of 12 to 14.4 VDC Note 2) | 24 VDC (Max. 300 mA) with accuracy of 22.0 to 26.8 VDC | q0 to 10 VDC (Output resistance: 6.5 k or more with accuracy of 0.5%F.S. or less)w4 to 20 mA DC (Output resistance: 800 or less with accuracy of 0.5%F.S. or less) | Output: 4 pointsOutput type: NPN, PNP open collector output Withstand voltage: Max. 30 VCurrent: Max. 100 mAInternal voltage drop: 1 V or lessSwitching between N.O. and N.C. modes is possible. | 5 to 640 ms | Power indication: 3 1/2-digit LED indicator (red) | Output power supply voltage and current signal indication: 1-digit LED indicator (red) | LED lights for RUN, CH, SW (red and green) | ?0.5%F.S. ?1dig (at 25C) | Approx. 4 times/s | ?0.12%F.S./C | Displayed on pressure indication LED | 0 to 50C | ?20 to 60C | 0 to 85%R.H. | 10 to 55 Hz 1.5 mm amplitude X, Y, Z directions for 2 hrs. each | 100 m/s2 (approx. 10 G) X, Y, Z direction | Only display unit with cover is equivalent to IP65. It is equivalent IP40 without cover. | Built-in sensor type, External sensor type Note 3) | 10 years when deenergized (EEPROM) | M5 female (built-in sensor type) | Enclosure: POM Display: PC Gasket: NBRPanel mount adapter: POMDisplay protective cover: PC | Approx. 330 g (Built-in sensor type)Approx. 345 g (External sensor type) |
