| PF3W711 | Water and ethylene glycol aqueous solution (with viscosity of 3 mPa?s [3 cP] or less) Note 1) | Karman vortex | 10 to 100 L/min | 7 to 140 L/min(Flow under 7 L/min is displayed as ?0?) | 7 to 140 L/min | 1 L/min | 1 L/pulse | 0 to 70oC (with no freezing and condensation) | Instantaneous flow rate: L/min, Accumulated flow: L, Display values updated 5 times per second | Display value: p3% F.S. Analog output: p3% F.S. | p2% F.S. Note 2) | p5% F.S. (25oC reference) | 0 to 1 MPa | 1 MPa | 45 kPa or less at the maximum flow | 999999999 L | By 1 L | NPN or PNP open collector output | 80 mA | 28 VDC | NPN: 1 V or less (at 80 mA load current) PNP: 1.5 V or less (at 80 mA load current) | 0.5 s/1 s/2 s | Short circuit protection | Select from hysteresis mode, window comparator mode, accumulated output mode, or accumulated pulse output mode. | 0.5 s/1 s/2 s (linked with the switch output) | Voltage output: 1 to 5 V Output impedance: 1 k7 | Output current: 4 to 20 mA Max. load impedance: 300 7 for 12 VDC, 600 7 for 24 VDC | Variable | Voltage free input: 0.4 V or less (Reed or Solid state), input for 30 ms or longer | 2-screen display (Main screen: 4-digit, 7-segment, 2-color, Red/Green Sub screen: 6-digit, 11-segment, White) | Output 1, Output 2: Orange | 12 to 24 VDC p10% | 50 mA or less | IP65 | 0 to 50C (with no freezing and condensation) | Operation, Storage: 35 to 85% R.H. (with no condensation) | 1000 VAC for 1 minute between terminals and housing | 50 M7 or more (500 VDC measured via megohmmeter) between terminals and housing | CE marking, UL (CSA), RoHS | PPS, FKM, CPVC | Non-grease | 25A | 285 g | 370 g |
